Product description
EVA is a very soft material and can be cut by using just water, eliminating the abrasive medium costs. The precision and accuracy of each cut eliminate the need for molds or plates that other cutting methods require. A significant advantage to waterjet foam cutting is that it does not produce any hazardous waste, making it environmentally friendly. The water used in the process can be recycled through the machine to be used again and the process does not require cooling oils or lubricants after cutting.
Features:
• 50 HP High 420 MPa pressure for smooth finish cutting at high speed.
• Main heart of Supercharger, "Main parts of Intensifier" is "Made in USA".
• User friendly & minimum maintenance cutting head design with USA make "Water Switch Seal Kit" & other parts.
• All parts of machine are processed on Highly accurate YASKAWA servo motor (made in Japan). Which gives you trouble free operation & long life of parts.
• Use special water cutting machine software, a day to achieve a comprehensive grasp
•Non-standardized model design customization,Customizable submersible adjustable water level platform, equipment working noise is lower than 75Db.
The main parts of water jet cutting machine
|
Separated body between cutting table and load-bearing platform prevents interfering cutting accuracy from long-term stress variation to load-bearing platform.
|
Motor and ball screw are directly connected by flexible coupling. It can absorb vibration energy reversible and with higher drive accuracy compared with other torsional rigid coupling
|
The machine body is with casting structure and concrete structure. The metal parts have been specially processed to eliminate traces of deformation and to maintain long-term mechanical precision.
|
X beam of cutting table applies the one-off extrusion forming aluminum alloy, the most advanced technology in water jet cutting machine,light weight,strong steel,not deformed.
|
| Gantry Model |
HEAD2015BA |
HEAD2030BA |
HEAD3020BA |
HEAD3040BA |
| Cutting Table Size (mm) |
2000 X 1500 |
2000 X 3000 |
3000 X 2000 |
3000 X 4000 |
| Stroke |
X-axis (mm) |
2000 |
2000 |
3000 |
3000 |
| Y-axis (mm) |
1500 |
3000 |
2000 |
3000 |
| Z-axis (mm) |
150 |
150 |
150 |
150 |
| Q-axis |
Rotational Angle |
360 ° |
| Cutting Angle |
0-30 ° |
| CNC Controller |
Step System / Servo System |
| Accuracy |
Cutting |
± 0.1 mm |
| |
Repeatability |
± 0.05 mm |
| Traverse Speed |
6000/15000 mm/min |
| Customized |
Cutting table size can be customized according to customer demand |
Our Service
1. Maintenance free of charge for 12 months .
2. We will provide the consumable parts at an agency price.
3. 24 hours online service, free technical support.
4. Machine has been adjusted before delivery, operation disk is included in the delivery.
5. We have manual instruction and Videos for software Installation, operation and machine's using and maintenance; We will send professional technician to customers' factory, provide them two-weeks training, including working principle of machine, Auto CAD drawing, common problems and solution, etc.
Keep safety
Although anything can be cut through, waterjet is still very safe. It is because we don't need to put any body parts under the waterjet cutting head while it is on, obviously. If there is a leak in a high-pressure water system will tend pressure rapidly drop to safe level. Water itself is safe and non-explosive and the garnet abrasive is also inert and non-toxic. So using waterjet to cut material is very safety.
Environmentally friendly
As long as we are not machining a material that is hazardous, the spent abrasive and waste material become suitable for land fill. The garnet abrasive is inert and can be disposed of with our other trash.If we are machining lots of lead or other hazardous materials, we will still need to dispose of our waste appropriately, and recycle the water. Keep in mind, however, that very little metal is actually removed in the cutting process. This keeps the environmental impact relatively low, even if we do machine the occasional hazardous material.In most areas, excess water is simply drained to the sewer. In some areas, water treatment may be necessary prior to draining to sewer. In a few areas, a "closed loop" system that recycles the water may be required.
Our Package Advantage
1. Our Wooden Case is after fumigation treatment. Needn't timber inspection,saving shipping time.
2. All the spare parts of the machine were bovered by some soft materials,mainly using Pearl Wool.
Avoiding all damages that could happen in the delivery process.Then we'll covered plastic wrap out it tightly, make sure intact of the covered soft materials,also avoiding Waterproof and rust proof.
3. The outmost is Wooden Case With Fixed Formwork.
4. The bottom of the wooden case has firm iron jack,convenient to Handling and transport.
Machine inspection
For the finished product there are more than 24 hours of whole machine test, including software operation test, high pressure pump operation test, machine horizontal and vertical test, limit test, etc., to meet the national cutting standards and then allowed to leave the factory.
FAQ :
What materials or work pieces must be cut with a water cutter?
Profile cutting of metal, the thickness of more than 50mm to 150mm water jet cutting is more advantageous.
Kitchen and bathroom countertops, now available in a complete range of configurations, are very much in the mainstream.
Bathroom glass door handle, folding hole cutting, can be used in conjunction with the glass production line.
Cutting of composite materials such as Bakelite, GRP, FRP, Nylon, etc. reduces pollution without dust and gas.
Some special metals, titanium alloy must be cut with water cutter, other cutting methods can not be cut.
Automotive interior, seats, chassis, etc., with robotic arm, now widely used.
){kind=link}